Home > Products > Portable sound systems > P-Series, portable systems

k_range_overlogo_930_250px.jpg

The K-range of portable speakers are developed for DJ´s, bands, rental companies and for installations in small to medium live stages, nightclubs, lounges.
Every component is perfectly matched to the application it is designed for, resulting in very price efficient speakers with good quality.
There are 3 series in the K-RANGE
- K-SERIES: active and passive fullrange speakers, 
- KS-SERIES: active and passive subwoofers, 
- KX-SERIES: active stage monitors and multi purpose speakers

 

K10 - PASSIVE FULLRANGE SPEAKER

The K10 passive fullrange speakers was designed to be used for portable live music and recorded applications and for installation.
With the 12 x M10 flying points K-series fullrange speakers can be installed in a variety of ways, either as fullrange speakers, or as top speakers with any of the KS-series subwoofers for extended low frequency response.
Perfect for bands, DJ´s troubadours, rental and event companies,
or for installing in nightclubs, lounges, schools, live performance stages, theatres, conference centres, churches etc.

Fitted with top hat for mounting on speaker stands, handles and 12 x M10 rigging points, the drivers are protected by a fully covering speaker-grille with speaker foam behind.		 K10_back_front_400px.jpg
SPECIFICATIONS  
CONSTRUCTION Two-way passive,
tuned frontloade bassreflex		 APPLICATIONS
- Bands
- DJ´s
- Rental companies
- Installation fullrange speaker
- Installation as top with subwoofer
- As top in portable active system with subwoofer
  (see K1000 portable active system)
- Delay, sidefiill



FEATURES
- 10'' / 1'' components
- Passive design with deticated passive crossover network
- 2 handles
- 2 x Speakon input 
- Rubber feet
- Multi-layer plywood
- 12 x M10 fly-points for installation and rigging  
- Fully covering protective perfored steel grille with speaker foam behind
COMPONENTS LF: 10'' (320mm.)
HF: 1'' (25mm.) 
Nominal impedance 8 ohm
Power handling RMS 200W
Power handling cont. 400W
Frequency responce 70Hz -20kHz
Axial sensitivity 95dB, 1W/1m.
Max SPL (calc) 124dB
Dispersion HxV 80 x 60
Connectors 2 x Neutrik speakon NL4MP
1+/1- input
2+/2- link 
Weight 16 kg.
Dimensions mm. H485 x W300 x D321
Hardware M10 threaded rope-eye for installation

 

K12- PASSIVE FULLRANGE SPEAKER

The K12 passive fullrange speakers was designed to be used for portable live music and recorded applications and for installation.
With the 12 x M10 flying points K12 fullrange speakers can be installed in a variety of ways, either as fullrange speakers, or as top speakers with any of the KS-series subwoofers for extended low frequency response.
K12 is perfect for bands, DJ´s troubadours, rental and event companies,
or for installing in nightclubs, lounges, schools, live performance stages, theatres, conference centres, churches etc.

Fitted with top hat for mounting on speaker stands, handles and 12 x M10 rigging points, the drivers are protected by a fully covering speaker-grille with speaker foam behind.		 K10_back_front_400px.jpg
SPECIFICATIONS  
CONSTRUCTION Two-way passive,
tuned frontloade bassreflex		 APPLICATIONS
- Bands
- DJ´s
- Rental companies
- Installation fullrange speaker
- Installation as top with subwoofer
- As top in portable active system with subwoofer
  (see K1000 portable active system)
- Delay, sidefiill



FEATURES
- 12'' / 1'' components
- Passive design with deticated passive crossover network
- 2 handles
- 2 x Speakon input 
- Rubber feet
- Multi-layer plywood
- 12 x M10 fly-points for installation and rigging  
- Fully covering protective perfored steel grille with speaker foam behind
COMPONENTS LF: 12'' (320mm.)
HF: 1'' (25mm.) 
Nominal impedance 8 ohm
Power handling RMS 300W
Power handling cont. 600W
Frequency responce 60Hz -20kHz
Axial sensitivity 97dB, 1W/1m.
Max SPL (calc) 128dB
Dispersion HxV 90 x 80
Connectors 2 x Neutrik speakon NL4MP
1+/1- input
2+/2- link 
Weight 19,5 kg.
Dimensions mm. H565 x W350 x D376
Hardware M10 threaded rope-eye for installation

K12A - ACTIVE FULLRANGE SPEAKER

The K12A active fullrange speakers was designed to be used for portable live music and recorded applications and for installation.
With the 12 x M10 flying points K-series fullrange speakers can be installed in a variety of ways, either as fullrange speakers, or as top speakers with any of the K-series active subwoofers for extended low frequency response.

Perfect for bands, DJ´s troubadours, rental and event companies,
or for installing in nightclubs, lounges, schools, live performance stages, theatres, conference centres, churches etc.

Fitted with top hat for mounting on speaker stands, handles and
12 x M10 rigging points, the drivers are protected by a fully covering speaker-grille with speaker foam behind.

The built-in amplifier houses a small mixer with 2 x mic input, perfect for small events and presentations, where 1 or 2 K12A can function as sound system

Bass and treble potentiometers allows for precise adjustment of frequency responce
XLR mix out controls the mixed volume of line and microphone

 

 K12A_x_2_500px.jpg
SPECIFICATIONS  
CONSTRUCTION Two-way passive,
tuned frontloade bassreflex		 APPLICATIONS
- Bands
- DJ´s
- Rental companies
- Installation fullrange speaker
- Installation as top with subwoofer
- As top in portable active system with active subwoofer
  (see K2000 portable active system)

FEATURES
- 12'' / 1'' components
- Active design with built-in 350W amplifiers
- 2 handles
- Rubber feet
- Multi-layer plywood
- 12 x M10 fly-points for installation and rigging  
- Fully covering protective perfored steel grille with speaker foam behind

SPECIFICATIONS AMPLIFIER
· 300W+50W amplifiers 
· Bass and treble control (+/-10dB) 
· XLR line in
· XLR mix out (line + microphone)
· 2 x mic input with separate volume 
· Line volume & master volume 
· 3 x Led for active, signal and clip. 
· 230V/115V select switch 
· Power on/off switch 
· AC in with fuse slot 
COMPONENTS LF: 12'' (320mm.)
HF: 1'' (25mm.) 
Nominal impedance 8 ohm
Power handling RMS 300W
Power handling cont. 600W
Frequency responce 60Hz -20kHz
Axial sensitivity 97dB, 1W/1m.
Max SPL (calc) 128dB
Dispersion HxV 90 x 80
Connectors 3-pin XLR line input
2 x TELE in for microphone
XLR mixed output 
Controls Bass +/-10dB
Treble +/-10dB
Line volume
Masteer volume
MIC1 volume
MIC2 volume 
Weight 16 kg.
Dimensions mm. H485 x W300 x D321
Hardware M10 threaded rope-eye for installation
 

K12A_back_panel_500px.jpg
BACK PANEL OF K12A

KS15 PORTABLE SUBWOOFER

Passive (bi-amplified) subwoofer.
We designed the subwoofers to reproduce an accurate and precise base with rapid cone control and natural frequency
response.
KS15 is perfect for portable use with any of the K-series fullrange speakers, either as a portable sound system with external 19" DSP-processors and amplifiers, or in fixed installations.

All K-series cabinets are painted with a special hardened lacque for withstanding ”on the road” handling,
each subwoofer have two handles, speaker stand top-hat, four rubber feet, fully covering protective front grille with speaker foam behind, castor plates, ”gig-bags”, rigging- & installation- hardware are available as options.


 

 KS15_KS18_500px.jpg
SPECIFICATIONS  
CONSTRUCTION Tuned frontloade bassreflex APPLICATIONS
- Bands
- DJ´s
- Rental companies
- Installation subwoofer



FEATURES
- 1 x 15'' woofer with 4'' voicecoil
- 2 handles
- Rubber feet
- Multi-layer plywood
- 16 x M10 fly-points for installation and rigging  
- Fully covering protective perfored steel grille with speaker foam behind
COMPONENTS 15'' woofer, 4''voice coil
Nominal impedance 8 ohm
Power handling RMS 600W
Power handling cont. 1200W
Frequency responce 45Hz -180Hz
Axial sensitivity 99dB, 1W/1m.
Max SPL (calc) 132dB
Connectors 2 x Neutrik Speakon NL4MP
1+/1- input
2+/2- link 
Weight 31 kg.
Dimensions mm. H550 x W450 x D640
Hardware M10 threaded rope-eye for installation
 

KS15A PORTABLE SUBWOOFER

Active(self-powered) subwoofer with 3 built-in amplifiers.
600W mono for the 15'' woofer with adjustable Lo-Pass crossover frequency (24dB Linkwitz-Riley) from 80-180Hz, and additionally 2 x 200W for powering 2 fullrange speaker in stereo mode, with switchable High-Pass crossover frequency.

We designed the subwoofers to reproduce an accurate and precise base with rapid cone control and natural frequency response.
KS15A is perfect for portable use with any of the K-series passive fullrange speakers, either as a portable sound system, or in fixed installations.

All K-series cabinets are painted with a special hardened lacque for withstanding ”on the road” handling, each subwoofer have two handles, speaker stand top-hat, four rubber feet, fully covering protective front grille with speaker foam behind, castor plates, ”gig-bags”, rigging- & installation- hardware are available as options.

 

 KS15A_500px.jpg
SPECIFICATIONS  
CONSTRUCTION Tuned frontloade bassreflex APPLICATIONS
- Bands
- DJ´s
- Rental companies
- Installation subwoofer

FEATURES
- 1 x 15'' woofer with 4'' voicecoil
- 2 handles
- Rubber feet
- Multi-layer plywood
- 16 x M10 fly-points for installation and rigging  
- Fully covering protective perfored steel grille with speaker foam behind

FEATURES AMPLIFIER
- 600W for subwoofer + 200W + 200W to stereo top speakers, also driving two K10 or K12 fullrange speakers in an active system
- Balanced XLR left/right in
- Unbalanced RCA left/right input,
- Adjustable LP-crossover frequency 80-180Hz, 24dB/oct,
- 2 x speakon out,
- Adjustable HP-crossover for speakon output to top speakers 20Hz/80Hz/120Hz,
- 2 x mic in with separate volume,
- Separate volume for subwoofer,
- Master volume,
- 3-band EQ on top speaker output.
- Stereo input, mono subwoofer and stereo top speakers out
COMPONENTS 15'' woofer, 4''voice coil
Nominal impedance 8 ohm
Power handling RMS 600W
Power handling cont. 1200W
Frequency responce 45Hz -180Hz
Axial sensitivity 99dB, 1W/1m.
Max SPL (calc) 132dB
Connectors 2 x Neutrik Speakon NL4MP
1+/1- input
2+/2- link 
Weight 50 kg.
Dimensions mm. H550 x W450 x D640
Hardware M10 threaded rope-eye for installation

 K1000_430px.jpg K1000_bak_430px.jpg

KS18 PORTABLE SUBWOOFER

Passive (bi-amplified) 18'' subwoofer.We designed the KS18 subwoofers to reproduce an accurate and precise base with rapid cone control and natural frequency response. KS18 is perfect for portable use with any of the K-series fullrange speakers, either as a portable sound system with external 19" DSP-processors and amplifiers, or in fixed installations.

All KS-series subwoofer cabinets are painted with a special hardened lacque for withstanding ”on the road” handling.

Each subwoofer have two handles, speaker stand top-hat, four rubber feet, fully covering protective front grille with speaker foam behind, castor plates, ”gig-bags”, rigging- & installation- hardware are available as options.

 
 

 KS15_KS18_500px.jpg
SPECIFICATIONS  
CONSTRUCTION Tuned frontloade bassreflex APPLICATIONS
- Bands
- DJ´s
- Rental companies
- Installation subwoofer



FEATURES
- 1 x 18'' woofer with 4'' voice coil
- 2 handles
- Rubber feet
- Multi-layer plywood
- 16 x M10 fly-points for installation and rigging  
- Fully covering protective perfored steel grille with speaker foam behind
COMPONENTS 18'' woofer, 4''voice coil
Nominal impedance 8 ohm
Power handling RMS 650W
Power handling cont. 1300W
Frequency responce 40Hz -180Hz
Axial sensitivity 99dB, 1W/1m.
Max SPL (calc) 139dB
Connectors 2 x Neutrik Speakon NL4MP
1+/1- input
2+/2- link 
Weight 40 kg.
Dimensions mm. H650 x W650 x D650
Hardware M10 threaded rope-eye for installation
 

KS18A PORTABLE SUBWOOFER

Active(self-powered) 18'' subwoofer with built-in 600W amplifiers.
with adjustable Lo-Pass crossover frequency (24dB Linkwitz-Riley) from 80-180Hz, 
Balanced XLR stereo input via 2 x XLR 3-pin connectors, monosum to the woofer, and stereo out via 2 x 3-pin XLR, with Adjustable HiPass filter, for connecting active fullrange top speaker and use as a active sound system

We designed the subwoofers to reproduce an accurate and precise base with rapid cone control and natural frequency response.
KS18A is perfect for portable use with any of the K-series active fullrange speakers, either as a portable sound system, or in fixed installations.

All KS-series subwoofer cabinets are painted with a special hardened lacque for withstanding ”on the road” handling, each subwoofer have two handles, speaker stand top-hat, four rubber feet, fully covering protective front grille with speaker foam behind, castor plates, ”gig-bags”, rigging- & installation- hardware are available as options.

 

 KS18A_sub_collage_500px.jpg
SPECIFICATIONS  
CONSTRUCTION Tuned frontloade bassreflex APPLICATIONS
- Bands
- DJ´s
- Rental companies
- Installation subwoofer

FEATURES
- 1 x 15'' woofer with 4'' voicecoil
- 2 handles
- Rubber feet
- Multi-layer plywood
- 16 x M10 fly-points for installation and rigging  
- Fully covering protective perfored steel grille with speaker foam behind

FEATURES AMPLIFIER
- 600W amplifier 
- Balanced XLR left/right in
- Unbalanced RCA input
- Adjustable LP-crossover frequency 80-180Hz, 24dB/oct,
- 2 x XLR HiPass out, with adjustable HiPass crossover frequency, 20Hz/80Hz/120Hz,
- 2 x mic in with separate volume,
- Separate volume for subwoofer,
- Master volume,
- 3-band EQ on top speaker output.
- Stereo input, mono subwoofer and stereo top speakers out
COMPONENTS 18'' woofer, 4''voice coil
Nominal impedance 8 ohm
Power handling RMS 650W
Power handling cont. 1300W
Frequency responce 40Hz -180Hz
Axial sensitivity 99dB, 1W/1m.
Max SPL (calc) 133dB
Connectors 2 x Neutrik Speakon NL4MP
1+/1- input
2+/2- link 
Weight 55 kg.
Dimensions mm. H650 x W540 x D650
Hardware M10 threaded rope-eye for installation

 K2000_rigg_430px.jpg 

KX10A - ACTIVE FULLRANGE MONITOR
AND MULTI PURPOSE SPEAKER

KX-Series multipurpose stage monitors, Low profile active stage monitors, for live stages, bands, trubadours, DJ´s, TV-studios, schools, rental companies, the event industry, or for other demanding performances.

The coaxial 10''/1'' design with a conical dispersion of 80x80 generates a coherent and symmetrical dispersion pattern.
The KX-series has a balanced frequency response with a rich, transparent sound, ideal for vocal monitoring as well as instruments or recorded music.
Fullrange frequency response in combination with an abundance of features makes the KX-series versatile in usage, as a stage monitor, as a stand-alone fullrange speaker mounted on speaker stands for vocal or acoustical performances, or together with subwoofers (KS15A or KS18A) in a powerful active sound system.

Fitted with 14 x M10 cage nuts for rigging, flying or installing, fully covering protective perfored steel grille with speaker foam behind, two handles, top hat for mounting on stand.

 

 KX10A_475px.jpg
SPECIFICATIONS  
CONSTRUCTION Two-way active coaxial,
tuned frontloade bassreflex		 APPLICATIONS
- Bands
- DJ´s
- Rental companies
- Installation fullrange speaker
- Installation as top with subwoofer
- As top in portable active system with active subwoofer

FEATURES
- 10'' / 1'' components
- Active design with built-in 350W class-D amplifiers
- 2 handles
- Top hat for mounting on speaker stand
- Rubber feet
- Multi-layer plywood
- 14 x M10 fly-points for installation and rigging  
- Fully covering protective perfored steel grille with speaker foam behind

SPECIFICATIONS AMPLIFIER
· 300W+50W class-D, light weight amplifiers 
· Bass and treble control (+/-10dB) 
· XLR line in
· XLR mix out (line + microphone)
· 1 x mic input with separate volume 
· Line volume & master volume 
· 230V/115V select switch 
· Power on/off switch 
· AC in with fuse slot 
COMPONENTS LF: 10'' (320mm.)
HF: 1'' (25mm.) 
Nominal impedance 8 ohm
Power handling RMS 200W
Power handling cont. 400W
Frequency responce 70Hz -20kHz
Axial sensitivity 96dB, 1W/1m.
Max SPL (calc) 122dB
Dispersion HxV 80 x 80 conical
Connectors 3-pin XLR line input
2 x TELE in for microphone
XLR mixed output 
Controls Bass +/-10dB
Treble +/-10dB
Line volume
Master volume
MIC volume
Weight 12 kg.
Dimensions mm. H485 x W300 x D321
Hardware M10 threaded rope-eye for installation
 

KX12A_back.jpg

KX12A - ACTIVE FULLRANGE MONITOR
AND MULTI PURPOSE SPEAKER

KX-Series multipurpose stage monitors, Low profile active stage monitors, for live stages, bands, trubadours, DJ´s, TV-studios, schools, rental companies, the event industry, or for other demanding performances.

The coaxial 12''/1'' design with a conical dispersion of 80x80 generates a coherent and symmetrical dispersion pattern.
The KX-series has a balanced frequency response with a rich, transparent sound, ideal for vocal monitoring as well as instruments or recorded music.

Fullrange frequency response in combination with an abundance of features makes the KX-series versatile in usage, as a stage monitor, as a stand-alone fullrange speaker mounted on speaker stands for vocal or acoustical performances, or together with subwoofers (KS15A or KS18A) in a powerful active sound system.

Fitted with 14 x M10 cage nuts for rigging, flying or installing, fully covering protective perfored steel grille with speaker foam behind, two handles, top hat for mounting on stand.

 

 KX12A_500px.jpg
SPECIFICATIONS  
CONSTRUCTION Two-way active coaxial,
tuned frontloade bassreflex		 APPLICATIONS
- Bands
- DJ´s
- Rental companies
- Installation fullrange speaker
- Installation as top with subwoofer
- As top in portable active system with active subwoofer

FEATURES
- 12'' / 1'' components
- Active design with built-in 350W class-D amplifiers
- 2 handles
- Top hat for mounting on speaker stand
- Rubber feet
- Multi-layer plywood
- 14 x M10 fly-points for installation and rigging  
- Fully covering protective perfored steel grille with speaker foam behind

SPECIFICATIONS AMPLIFIER
· 300W+50W class-D, light weight amplifiers 
· Bass and treble control (+/-10dB) 
· XLR line in
· XLR mix out (line + microphone)
· 1 x mic input with separate volume 
· Line volume & master volume 
· 230V/115V select switch 
· Power on/off switch 
· AC in with fuse slot 
COMPONENTS LF: 12'' (320mm.)
HF: 1'' (25mm.) 
Nominal impedance 8 ohm
Power handling RMS 250W
Power handling cont. 500W
Frequency responce 60Hz -20kHz
Axial sensitivity 97dB, 1W/1m.
Max SPL (calc) 124dB
Dispersion HxV 80 x 80 conical
Connectors 3-pin XLR line input
2 x TELE in for microphone
XLR mixed output 
Controls Bass +/-10dB
Treble +/-10dB
Line volume
Master volume
MIC volume
Weight 17 kg.
Dimensions mm. H485 x W300 x D321
Hardware M10 threaded rope-eye for installation
 

KX12A_back.jpg